How to use Kitchen aid Mixer gear.

Drive out the groove pin with a punch if the gear assembly needs to be taken apart. This allows the gears to be replaced and the gear parts to be re-greased.Clean the roof of the gear case. This are may be packed with old grease and takes a full 6 oz. of new grease. Dislodge stuck old grease with a flat screw driver or Popsicle stick.

Fill the roof of the gear case area with six ounces of new grease as the kitchen aid mixer is reassembled. Reattach the worm gear assembly and bearing bracket to the gear case bottom cover, making sure the two dowels fit into base of the bearing bracket. Securely tighten the three screws that hold the bearing bracket.

Clean the gasket cover of the gear case. Replace the gasket cover by securing it over the dowel and pressing the gasket down. Reattach the top and bottom kitchen aid mixer sections, being careful to line up the shaft in the upper gear housing. Do not force the pieces together; they should assemble easily.

Replace the internal gear by prying it loose from the gear case cover. Replace it by aligning notches with the holes in the gear case, and screwing in the five screws to secure it. Fill the teeth of the internal gear with new grease if you have not already done so.Reattach the top and bottom kitchen aid mixer sections by using the four large Phillips screws.
Reassemble the planetary gear housing, being sure to lightly grease the shaft and all gears. Attach the reassembled planetary housing to the kitchen aid mixer by driving in the groove pin that secures it and replacing the drip cup on the gear case.

Looking for “Best Seller in Quart Mixer, Kitchen aid mixer ,Breville Juice Fountain” Products?

You may be interested in Quart Mixer Reviews / Kitchen aid mixer Reviews Best Seller :